The most common reason for scratches on the metal handrails to get a boat could be the usage of a house that has not yet been washed when washing or rinsing off.
The house, which might have already been on the yard floor or pontoon, could have found self-explanatory; this grit along with the hose, scratches the stainless as it’s pulled straight back and forth within the handrail. Are you looking for best Stainless steel hose(Also known as ท่อเหล็กสแตนเลสที่ดีที่สุด in Thai language) then you can navigate to original websites online?
To prevent this… clean the hose off until usage, then put enough hose span on board to your wash. By doing this you won’t be pulling the hose back and forth within the rails. Where the hose does match the stainless steel, tie off with a cloth.
Thus just how would you remove the contamination?
Forget about starting with metal polish, because it will only get rid of the very lightest of scrapes. What you will need is various levels of extra fine wet & dry sandpaper and some water, having a few drops of soap into a function like a lube.
Based upon the depth of the scratches (several may be simply too profound) 600, 800, 1200 & 2500 are quite a good selection. Follow with finer and finer grades before a reflection is formed. For more additional information about Stainless steel flange, you can check out http://nssteel.co.th/responsive/product.php?catid=25.
Try with the best possible you need to start with and only work with a coarser grade if that fails to ‘level’ them. Example: if you have started with 1200, then utilize 2500 and end with polish or compound.
For deeper scratches, you might have started with 600, therefore then follow with 800, 1200 afterward 2500 and end with polish or even a compound.